Led And Indicator Light - toscano TDS600 Serie Manual De Usuario

Key Name
Program/Exit key
Shift/Supervision
key
Function/Data key
Rev/Jog key
Run key
Stop/reset key
Multi-function key
Increasing button
Decreasing button
5.2.3. LED and indicator light
4 status indicator light: they are MOD(mode): ALM(alarm): FWD (forward
run): REV(reverse run)from left to right on the LED: their respective indicating
meaning is as shown in table 5-2.
158
Function description
Enter into or exit programming state
Can choose modifi cation digit of set data under editor state;
can switch display status supervision parameter under other
state
Enter into or exit programming state
Under keypad mode: to press this key can set reverse run or Jog
run according to the 1
Enter into forward run under keypad mode
In common run status the inverter will be stopped according to
set mode after pressing this key if run command channel is set
as keypad stop effective mode. The inverter will be reset and
resume normal stop status after pressing this key when the
inverter is in malfunction status.
The specifi c function keys decided by tens digit of F00.15 see
F00.15 parameter descriptions
To increase data or function code (to press it continuously can
improve increasing speed)
To decrease data or function code (to press it continuously can
improve decreasing speed)
Table 5-1 keypad function table
bit of parameter F00.15
st