Function Parameter Schedule Graph; Symbol Description - toscano TDS600 Serie Manual De Usuario

6. Function parameter schedule graph

6.1. Symbol description
× ---- parameter can't be changed in process of running
o ---- parameter can be changed in process of running
* ---- read-only parameter, unmodifiable
6.2. Function parameter schedule graph
Function
Name
code
F00.00 Parameter group
display control
F00.01
C-00 display
parameter selection
when operation
F00-System Parameter Group
Set range
0:Basic list mode(only displayF00~F03 basic
control parameter group and F26 fault record
parameter group.)
1:Middle list mode. Display all parameter
except for extension: virtual and reserve
parameter group.
2: Senior list mode. All parameter display.
3:User list mode. Display parameter defined
by user: and monitor parameter: F00.00
display all the time.
0: main setup frequency (0.01Hz)
1: auxiliary setup frequency (0.01Hz)
2: setup frequency (0.01Hz)
3: output frequency (0.01Hz)
4:output current(0.1A)
5:output voltage(1V)
6:DC busbar voltage(0.1V)
7:motor speed(1 circle/min)
8:motor line velocity(1 circle/min)
9:inverter temperature(1ºC)
10:run time already this time(0.1min)
11:current accumulate run time(1h)
12:current accumulate power-on time(1h)
13:inverter status
14:input terminal status
15:output terminal status
16:extension output terminal status
17:extension input terminal status
18:communication virtual input terminal
status
19:internal virtual input node status
20:analog input AI1(after checkout) (0.01V /
0.01mA)
21:analog input AI2(after checkout) (0.01V /
0.01mA)
22:extension analog input
checkout) (0.01V / 0.01mA)
23:extension analog input
checkout) (0.01V / 0.01mA)
6. Function parameter schedule graph
Min. Factory
unit Default
1 0
1 3
EAI1(after
EAI2(after
Modifi-
cation
o
o
167