Operating Modes - SICE S 58 LL Manual De Instrucciones

WARNING
If the by-pass coil (YV1) or the electronic
card have problems, the wheel can still
be released from the turntable. Set the
switch X (fig.44) (normally set to 0) to 1
(Stand-By function off). At this point, the
control unit motor will always be running.
Adjust the bypass coil (fig.45) and then
the respective solenoid valves (fig.49)
with a screwdriver to set the machine
to emergency operation. In this way,
the locked wheel can be released. Then
contact technical assistance.
WARNING
The "Spare parts" handbook does not
authorise users to carry out work on
the machine with the exception of those
operations expressly described in the
user manual. It only enables users to
provide the technical assistance service
with precise information in order to
minimise delays.
Table 1 summarises the machine's operating modes.
Table 1 – Operating modes
Mode
ALARM LED
(red)
NOR- off
MALM-
ODE
82

OPERATING MODES

Led Led
RX ON CABLE
(white) (green)
Flashes On with a
upon ar- steady light
rival of the if the cable
commands is con-
nected;
otherwise
it is off
DISPLAY Access
level
Variable FINAL
messages USER
- English - Operator's manual
44
45
Notes
Standard work
mode