Technical Details; Principle Of Operation - Royal Catering RCHP-100E Manual De Instrucciones

TECHNICAL DETAILS

Product name Warming Tray Glass
Art. Nr 1531
Model RCHP-500G
Power supply (V) / Frequency 230~ / 50
(Hz)
Power (W) 260
Heating range (°C) 30 - 85°C
Material of the housing Stainless steel
Material of the working surface Glass
IP protection class IPX3
Dimensions L x W x H (mm) 350 x 565 x 73
Weight (kg) 4.5
USAGE PURPOSE
Warming tray is designed to maintain food / food products hot using suitable dishes or containers.
Do not use the warming tray to:
• Warm up or heat up rooms.
• Warm or warm up flammable, noxious, particularly volatile, or any other toxic substances.
Any damage resulting from a non-conform use of the device is to be paid by the user.

PRINCIPLE OF OPERATION

Control panel:
Assembly
The device is composed of:
• A main ON/OFF switch (3).
• A thermostat to regulate the temperature at the level wished (2).
• An orange control light for the heating (1).
• A heating element.
Functioning:
The heating element's temperature is measured at regular intervals. This information is transmitted to the
thermostat as a current value, and gets compared to the value set by the user.
• If the current value is lower than the set value, the thermostat makes the device heat.
• If the current value is higher than or equal to the set value, the thermostat stops heating.
8
Warming Tray Stainless Steel
1530
RCHP-100E
1200
Stainless steel
Stainless steel
525 x 100 x 68
18.6
REV. 14 VI 2016
OPERATION
1. Place the device on a non-flammable surface.
2. Make sure that the main switch is OFF. Turn the thermostat to the 0 position.
3. Plug in the device (it is forbidden to use any extension cords or power strips) and turn the device on.
4. Regulate the thermostat to the chosen value.
5. The orange light HEAT turns on, the heating element starts to heat and the temperature rises
gradually.
6. As soon as the set temperature is reached, the orange light turns off and the heating element stops
to heat.
7. As soon as the temperature decreases, the thermostat reacts to it: the orange light turns on again
and the heating element starts to heat again.
8. After use, reset the thermostat to zero.
9. Generally speaking, it is advisable to unplug the device while not used.
10. To clean the rest of the device, watch out to protect the electric parts from humidity and from direct
water contact to avoid electric shocks and short-circuits. An impregnated cloth is absolutely enough if
you regularly clean the device.
11. If you don´t use the device for a longer time or store it, check the humidity and temperature
conditions: the air has to be dry and the device should be covered to be protected from dust
deposits.
WARNING! The working surface of the device becomes very hot while working. Do not touch the surface
with your bare hands!
Warning! It is forbidden to move the warming tray with containers / dishes on it – always remove
containers / dishes first, using protective gloves!
When moving the device always use the handles.
REGULAR CONTROL OF THE DEVICE
Regularly control that the device doesn´t present any damage. If there is any damage, please stop using the
device. Please contact your customer service to solve the problem.
What to do in case of problem?
Please contact your customer service and prepare following information:
• Invoice number and serial number (the latest is to be found on the technical plate on the device)
• If relevant, a picture of the damaged, broken or defective part
• It will be easier for your customer service clerk to determine the source of the problem if you give
a detailed and precise description of the matter. Avoid formulations like "the device doesn´t heat",
which may mean that it doesn´t heat enough or even not at all. Though, those two possibilities have a
different causation!
• Also indicate the performance of the lights to facilitate the diagnosis: Does the orange light turn on
when you set the temperature?
• Check with a thermometer that the device measures the temperature properly. (Caution: do not set
the thermostat on a value exceeding the maximal value of your thermometer!)
The more detailed your information, the quicker the customer service will be able to solve your problem
efficiently!
CAUTION: Never open the device without the authorization of your customer service. This can lead to a
loss of warranty!
REV. 14 VI 2016
9