Columbus AKS 70 BM 62 Manual De Instrucciones página 20

Ocultar thumbs Ver también para AKS 70 BM 62:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Vacuum sweeper
AKS 70|BM 62
CHAPTER 1 – GENERAL INFORMATION
______________________________________________________________________________________________
BEFORE USING THE MACHINE, READ THIS INSTRUCTION MANUAL CAREFULLY
______________________________________________________________________________________________
„columbus" DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS RESULTING FROM FAILURE TO COMPLY
WITH THE INSTRUCTIONS IN THIS MANUAL AND FROM INCORRECT AND / OR IMPROPER MACHINE USE.
ALL THE EQUIPMENT NEEDED FOR PERSONAL PROTECTION (GLOVES, MASKS, WHITE-LENS GLASSES, KEYS, TOOLS, ETC.) MUST BE
PROVIDED BY THE USER. FOR EASIER READING, REFER TO THE CONTENTS PAGE.
ALWAYS KEEP THIS MANUAL HANDY FOR QUICK REFERENCE (IN CASE OF LOSS, ASK YOUR DEALER FOR ANOTHER COPY)
„columbus" RESERVES THE RIGHT TO MAKE CHANGES OR UPGRADE ITS MACHINES, WITHOUT ANY OBLIGATION TO UPGRADE
CHAPTER 2 - PURPOSES / INTENDED USE
As per directive EC, every machine is supplied with a manual for its use and maintenance. Should this documentation result missing, the user is
kindly requested to order it.
Every machine is accompanied by the following documentation:
- Handbook for use and maintenance
- Declaration of conformity to directive EC.
With the aim of using the machine correctly and with maximum safety, the user must carefully read this entire manual, paying particular
attention to the sections regarding potential risks, safety regulations and emergency operations.
All the articles for the personal protection of the operator, specifically indicated in the manual, (gloves, masks, glasses, etc.) must be supplied
by the user. The terms front, rear, left and right used in this publication always refer to the driving position occupied by the operator.
To assure the longest possible life of the machine parts, the instructions in this handbook must be followed closely and only original spare
parts must be used. Data contained in these documents are liable to change since the Manufacturer reserved the right, in any given moment,
to make modifications with the aim of improving the machines.
CHAPTER 3 – PREPARATION (UNPACKING)
After removing the outer packaging, remove the machine from the pallet; this operation can be done in two ways: (You will find all pictures
from page 67 onwards)
A)
Take a hook and 4 tie-rods of suitable lifting capacity for the weight of the machine (shown on the CE plate). Lift the motor bonnet
and secure the four eyebolts or hooks in the threaded housings (the lifting hooks are inside the waste container Part. B FIG. 1
together with the side brushes and instruction manuals); secure all four straps to their respective lifting hooks Part. A Fig. 1 and with
the aid of a fork lift truck or bridge crane (suitable for weight of the machine), lift this off the pallet and rest it on the floor very
slowly.
_____________________________________________________________________________________________________
THE MACHINE CAN ONLY BE LIFTED WHEN ALL FOUR STRAPS HAVE BEEN SECURED TO THEIR RESPECTIVE EYEBOLTS (M10
EYEBOLTS).
_____________________________________________________________________________________________________
PREVIOUSLY- SOLD MACHINES.
ALL „columbus" SWEEPERS CONFORM TO EEC STANDARDS AND ARE LABELLED:
20

Publicidad

Tabla de contenido
loading

Tabla de contenido