Touch Panel Adjust - Sony XAV-68BT Manual De Instrucciones

Beep
Unit status: Any status
Option Purpose
OFF, ON () To activate the operation sound.
Dimmer
Unit status: Any status
Option Purpose
OFF To deactivate the dimmer.
Auto () To dim the display automatically
when you turn lights on.
(Available only when the
illumination control lead is
connected.)
ON To dim the display.
Dimmer Level
Unit status: Any status
Option Purpose
(–5 - +5) To select the brightness level
: 0
when the dimmer is activated.

Touch Panel Adjust

Unit status: Any status
Option Purpose
– To adjust the touch panel
calibration if the touching
position does not correspond
with the proper item.
Output Color System
Unit status: No source selected
Option Purpose
NTSC (), PAL To change the color system
according to the connected
monitor. (SECAM is not
supported.)
Camera Input
Unit status: Any status
Option Purpose
OFF To deactivate the input.
Normal () To display the picture from the
rear view camera.
Reverse To flip the picture from the rear
view camera horizontally.
Steering Control
You can operate the unit with buttons on the
steering wheel.
For safety, park your car before making this
setting.
Unit status: Any status
Option Purpose
User To display the instruction and
panel for steering wheel control.
External () To deactivate steering wheel
control.
To use rotary commander
control.
User Defined
This setting is available only when [Steering
Control] is set to [User].
The steering button panel appears.
 Press and hold the button you want to assign
to the steering wheel.
The button on the panel lights up (standby).
 Press and hold the button on the steering
wheel you want to assign the function to.
The button on the panel changes to blue
(registration complete).
 To register other buttons, repeat steps  and
.
Unit status: Any status
Option Purpose
– To display the instruction and
control panel.
Notes
 If an error occurs while registering, all the registered
information is cleared. Restart registration from the
beginning.
 If leave the setting display and reconfigure the
setting, all the registered information is cleared.
Restart registration from the beginning.
 This function may not be available on some vehicles.
For details on the compatibility of your vehicle, visit
the support site on the back page.
FM Tuning Interval
Unit status: Any status
Option Purpose
100 kHz To select the FM tuning interval.
200 kHz ()
Bluetooth Connection
Unit status: Any status
Option Purpose
ON, OFF () To activate the BLUETOOTH
signal.
17
GB