Integrated Descaling Programme - melitta Caffeo BISTRO Manual De Instrucciones

11.5 Integrated descaling programme

The integrated descaling program removes lime scale in the interior of the
appliance. It takes a total of approximately 15 minutes. The symbol for descaling
fl ashes during the entire process.
Prerequisite: The appliance is in stand-by mode (see „Switching on and off"
on page 55).
Caution!
– Carry out the integrated descaling programme every 3 months or when the
descaling symbol
– Only use Melitta
cleaning tabs are specifi cally designed for the Melitta
– Never use vinegar or other descaling agents.
Run the integrated descaling programme as follows:
1 Before descaling, remove – if necessary – the Melitta
fi lter from the water tank (see page 56).
2 Press the button for two-cup dispensing
simultaneously for about 3 seconds.
→ The descaling symbol
Phase 1
During Phase 1, one bean symbol
3 Empty the drip tray and coffee grounds container.
4 Reinsert the drip tray without the coffee grounds container, and place
the coffee grounds container under the Perfect Cappuccino.
→ The symbol for the water reservoir
5 Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up
and out of the appliance and then empty it completely.
6 Add the descaling agent (e.g. Melitta
liquid descaling agent) to the water tank according to the instructions on
the packaging.
72
illuminates on the display.
ANTI CALC Espresso Machines descaling agent. These
®
and the drip tray symbol
is shown on the display.
CAFFEO
®
®
and the ON/OFF button
illuminate.
illuminates.
ANTI CALC Espresso Machines
®
.
®
Claris water
®