SPORTSTECH HGX100 Manual De Instrucciones página 62

A. Attach the 3890 mm Upper cable (39#) through the opening of the upper frame , Make sure the ball stopper should
be in front of the upper frame, Place 1PC Pulley (74#) below the cable and secure the 1st pulley using 1PC M10 × 45
Allen bolt (94#) ,2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
B. Draw the cable backwards and place the 2st pulley below the cable , Secure the pulley with the same way in A.
C. Draw the cable around the pulley and front , Place the 3st pulley below the cable and secure it with 1PC M10×160
Allen bolt (100#), 2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
D. Draw the cable around the pulley and backwards,Place the 4st pulley below the cable and secure it with the same way
in A.
E. Draw the cable around the pulley and downwards,Place the 5st pulley below the cable, Secure the pulley with 1pc
M10*50 Allen bolt(95#), 2PC ø10 washer (105#) ,2pcs bushing (44#),double floating pulley bracket (30#),and 1pc
M10 Aircraft nut (103#).
F. Draw the cable around the pulley and upwards ,Place the 6st pulley below the cable and secure it with 1pc M10*65
Allen bolt (93#),2pcs bushing (41#) and 1 pc M10 Aircraft nut(103#).
G. Draw the cable around the pulley and downwards,Thread the end of the upper cable to the top opening of the selector
rod at least 5 laps to keep safe.
62