Cleaning Instructions - Angelo Po 0G1FR3GD Manual De Uso

CLEANING INSTRUCTIONS

Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning operation, al-
ways turn off the gas supply tap, cut off the
electricity supply using the master switch
and allow the appliance to cool.
The precautions which follow are also important.
Caution - warning
When using detergents, rubber gloves, pro-
tective mask and safety goggles must be
worn in accordance with the relevant safety
regulations.
1 - Clean all parts of the appliance with warm wa-
ter, food-approved detergents and non-abra-
sive materials only.
2 - Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all sur-
rounding areas.
To carry out this operation, proceed as follows.
1 - Switch the appliance off and leave it to cool
(see page 11)
2 - Turn off the circuit-breaker to disconnect it from
the electrical mains.
3 - Remove and clean the baskets and the basket
support structure (A).
4 - Drain and filter the oil (see page 12)
5 - Apply a food-grade detergent to the inside of
the well.
6 - Rinse the well with drinking water and drain.
7 - Apply a specific product or a water and vinegar
solution to the well to remove the detergent res-
idues.
8 - Rinse, empty and dry the well.
9 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
CLEANING WELL, BASKETS AND BASKET SUPPORT STRUCTURE
3 - Take special care when cleaning the zones
which come into contact with foods (well, bas-
kets and mesh base). Use of a dishwasher is
recommended when possible.
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse surfaces with drinking water and dry.
5 - Pressurised water jets may only be used on ex-
ternal parts.
6 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
7 - Remove food residues immediately be-
fore they set.
8 - Remove the limescale deposits which
may form on some of the appliance's sur-
faces.
A
Important
When using water for routine cleaning,
check that there are no traces of water left
in the well, on the accessories and in the
drain line before refilling with oil.
- 15 -
IT
GB
DE
FR
ES
IDM-39603311300.tif
English