ROBBE POWER PEAK ULTIMATE 2 Manual De Uso página 34

Operating instructions No.
POWER PEAK ULTIMATE 2 8470
Dear customer,
Congratulations on your choice of the Power Peak ULTIMATE 2 automatic charger from
the robbe range. You are now the owner of a high-performance micro-processor control-
led charger with battery management, for use with a 12 V power source.
The charger is simple to use, but the operation of a sophisticated automatic charger such
as the Power Peak ULTIMATE 2 does require some knowledge on the part of the user.
These operating instructions are designed to ensure that you quickly become familiar with
the unit's facilities.
It is therefore important that you read right through the operating instructions, and espe-
cially the section entitled "A brief guide to battery types" and the safety notes, before you
attempt to use your new automatic charger for the first time.
Safety Notes
At the end of the operating instructions you will find comprehensive safety notes
dealing with the safe handling of battery chargers and the various battery types.
You will also find additional useful general information concerning battery types in the
section entitled "A BRIEF GUIDE TO BATTERY TYPES".
Please BE SURE to read these instructions and safety notes before you use the char-
ger for the first time.
Mishandling batteries and battery chargers can be dangerous, as it involves a risk of
batteries exploding and catching fire.
Liability exclusion
This charger is designed and approved exclusively for charging the types of battery
stated in these operating instructions. robbe Modellsport accepts no liability of any
kind if the charger is used for any purpose other than that stated.
We at robbe Modellsport are unable to ensure that you follow the instructions supplied
with the charger, and we have no control over the methods you employ for using, opera-
ting and maintaining the device.
For this reason we are obliged to deny all liability for loss, damage or costs which are
incurred due to the incompetent or incorrect use and operation of our products, or which
are connected with such operation in any way.
Unless otherwise prescribed by law, our obligation to pay compensation, regardless of
the legal argument employed, is limited to the invoice value of those robbe products
which were immediately and directly involved in the event which caused the damage. This
does not apply if the company is found to be subject to unlimited liability according to
binding legal regulation on account of deliberate or gross negligence.
2