Maintenance And Care; Replacing Fuel Filter - Shindaiwa EB262 Manual De Instrucciones

Maintenance and care

Replacing fuel filter

1. Fuel cap
3. Fuel line
5. Fuel tank
2. Fuel filter
4. Fuel line hook
Tools required: 200-250 mm (8-10 in.) length of wire with
one end bent into a hook, clean rag, funnel,
and an approved fuel container
Parts required: Fuel line and filter
Fuel is VERY flammable. Use extreme care when mixing,
storing or handling.
NOTE
If filter is excessive dirty or no longer fits properly, replace it.
1. Use a clean rag to remove loose dirt from around fuel cap
and empty fuel tank.
2. Use the "fuel line hook" to pull the fuel line and filter from the
tank.
3. Remove the filter from the line and install the new filter.
20
DANGER