Muskoka MFBC42WS Manual De Uso Y Cuidado página 6

Using the heat button
The heat button (3) turns the heater on and off. To adjust the thermostat settings touch the heat button
on the touchscreen control to activate the heater then touch and hold the heat button for 5 seconds,
the digital display (6) will flash and enter the temperature adjustment mode. In the adjustment mode
press the heat button (3) to adjust the desired temperature. There are 22 temperature settings: 72˚F
- 73˚F...82˚F - ON - 62˚F - 63˚F...71˚F (Celsius temperature 22˚C - 23˚C...27˚C - ON - 17˚C -
18...21˚C). Once you've selected your desired temperature the display will flash 5 times and exit
the adjustment mode. Once the desired room temperature is reached the heater will deactivate.
To display the temperature setting in either Fahrenheit or Celsius, touch the heat button on the
touchscreen control to activate the heater then touch and hold the power button for 5 seconds. The
display will flash 3 times and switch between Fahrenheit or Celsius.
To enter no-heat "demo mode" touch and hold the heat button on the touchscreen control for 10
seconds. The logs will flash 6 times and the heater function will be locked out. While in demo mode
touch and hold the heat button on the touchscreen control for 10 seconds to reactivate the heater.
Using the timer button
Pressing the timer control button (4) will set the timer and
each subsequent press of the timer button will increase
the timer function in 1 hour increments. This interval
period is shown in the display (6). The set intervals range
from 1 - 8 hours.
Button Press
1
2
3
4
5
6
7
8
9
5
Timer Interval Display
1 hour 1h
2 hour 2h
3 hour 3h
4 hour 4h
5 hour 5h
6 hour 6h
7 hour 7h
8 hour 8h
Off None