Unold DUO Instrucciones De Uso página 29

25 minutes. Check the freezing
process from time to time. How-
ever we recommend that you not
switch the appliance on or off too
frequently, because through so
doing the ice cream can firmly
freeze onto the edge of the con-
tainer and it is possible that the
mixer will no longer work cor-
rectly.
11. Always switch the appliance off
when the mixer is at a standstill
to prevent the motor from overhe-
ating. Then allow the appliance to
cool down slightly and switch the
appliance on again.
12. Switch off the appliance via the
ON/OFF switch.
13. Take off the motor and the lid by
turning the unlock switch to 
and lifting the lid with the motor
upward and off.
14. Pull the mixers out of the cooling
containers.
15. Take the cooling containers off of
the appliance base.
16. It is best to remove the ice cream
with a plastic or wooden spatula,
so as not to scratch the contai-
ners.
17. Ice cream should have a soft con-
sistency. However, if you prefer
harder ice cream, then additio-
nally place the container in the
freezer compartment/freezer.
18. However do not keep the ice
cream in the container in the free-
zer compartment for longer than
30 minutes. If you do not want
Copyright UNOLD AG | www.unold.de
to eat the ice cream immedia-
tely, then put it in a freezer box
and then place this freezer box in
the freezer compartment. In this
regard, due to the contraction of
ice crystals the ice cream can
form water streaks because the
optimal ice cream temperature
is approx. −10°C, but the tempe-
rature in the freezing devices is
usually lower.
19. If the ice cream has not reached
the desired consistency, and you
want to again commence prepara-
tion, you must first take the lid off
of the motor. Then re-assemble all
parts, as described in the section,
„Assembly". This ensures that
the axles of the mixers are inser-
ted correctly.
20. Caution: However do not switch off
the appliance while it is making
ice cream. This would cause the
ice cream mixture to freeze to the
edge of the cooling container. If
the motor should overheat when
ice cream is being prepared, the
motor switches off. In this case,
place the ON/OFF switch on
„OFF", unplug the power plug
and allow the appliance to cool.
If you want to continue preparing
ice cream, it may be necessary to
use new ice cream ingredients.
In this case the ice cream should
be removed from the cooling con-
tainer with a plastic spatula, not
through the discharge opening!
29