Technical Information - Orien FS-50IMOD Manual Del Usuario

Máquina automática para hacer hielo al aire libre

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Electrical Connection

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

For personal safety, this appliance must be properly grounded. The power cord of this appliance

is equipped with a 3-prong grounding plug that mates with a standard 3-prong grounding wall

outlet to minimize the possibility of electric shock hazard from the appliance. Have the wall

outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to

have it replaced with a properly grounded 3-prong wall outlet. The ice maker should always be

plugged into its own individual electrical outlet which has a voltage rating that matches the

rating label on the appliance. This provides the best performance and also prevents overloading

house wiring circuits which could cause a fire hazard from overheated wires. Never unplug your

ice maker by pulling on the power cord. Always grip the plug firmly and pull straight out from

the outlet. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either

end. When moving the ice maker, be careful not to damage the power cord.

Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you

do not use an extension cord with this ice maker.

Ice-making/Ice-harvest rated current:

Width × Depth × Height (with feet):

Width × Depth × Height (with casters)

The technical data and performance index listed above should be used for reference only.

They are subject to change.

* The actual quantity of ice produced per day can vary with room and water conditions.