BEFORE USING THE APPLIANCE
1.
Remove all packaging materials and transport safeguards. Keep packaging
materials away from children– danger of suffocation!
2.
Before taking your ice cream maker into operation for the first time, we
recommend to rinse all removable parts – except the compressor casing (4)
– in warm water.
3.
Wipe the casing and slot for the ice cream bowl with a damp, well-wrung
cloth.
4.
Place the appliance on a dry, level work surface.
5.
Due to storage and transport, the lubricant for the mixer drive may become
viscous in individual cases. If the mixer does not rotate automatically dur-
ing operation or after a longer break, please press the mixer firmly into the
ice container and turn it clockwise by hand a few times. A smooth opera-
tion is usually possible then. Otherwise, please contact our customer ser-
vice department.
DESCRIPTION OF BUTTONS
Time +
Time -
steps. When you keep pressing this button, the time passes continuously. The
maximum time for preparation is 60 minutes
Button
"Time –"
This button shortens the time in 1-minute-steps. When you keep pressing this
button, the time passes continuously. The minimum time for preparation is
5 minutes. It is not possible to set the preparation time to less than 5 minutes.
Button
"Start/Break"
This button starts the programme. It is possible to interrupt by pressing this but-
ton as well. When you interrupt the programme, the preselected time is inter-
rupted as well. As soon as you press the button START/BREAK, the appliance
Stand 29.7.2020
Copyright UNOLD AG | www.unold.de
Start/Break
Button
When the plug is in the power socket,
the appliance is in the stand-by-mode.
Press the button in order to turn on the
appliance. In order to turn off the appli-
ance during operation, press this button
as well.
Power
Button
This button extends the time in 1-minute-
"Power"
"Time +"
DE
EN
FR
NL
IT
ES
PL
27 von 100