Install The Gun Holder; Install The Upper Handle; Install The Wheels; Install The Spray Wand - GreenWorks PWA201 Manual Del Operador

3.3

INSTALL THE GUN HOLDER

1. Aligh the screw sleeves of the gun holder (11) with the
screw holes on the upper handle.
2. Push the screws through the screw sleeves and tighten
them.
3.4

INSTALL THE UPPER HANDLE

1. Push and hold the handle lock button (12) on the upper
handle (22).
2. Move the upper handle (22) into the lower handle (23)
until the handle lock button (12) clicks through the slot.
3.5

INSTALL THE WHEELS

1. Put an axle (24) through the wheel and handle frame.
2. Attach a washer (16) to the axle (24).
3. Put a cotter pin (17) through the hole of the axle (24).
English
3.6
1. Push the end of the spray wand (2) into the gun (3).
2. Turn the spray wand (2) clockwise until the tabs lock into
position.
22
Make sure that the connection has no leakage.
3.7
12
23
1. Turn the crank handle to release the high pressure hose
(4).
2. Push and turn clockwise one end of the high pressure
hose (4) into the inlet coupler (15).
3. Install and tighten the other end of the high pressure hose
(4) onto the water outlet (6).
4
Make sure that all the connections are tight and have no
leakage before operation.
4.1
For easy operation, please use a self-coiling garden hose (not
provided).
7

INSTALL THE SPRAY WAND

WARNING
INSTALL THE HIGH PRESSURE
HOSE

OPERATION

WARNING
CONNECT THE WATER SUPPLY
TO THE MACHINE
EN