Publicidad
Idiomas disponibles
Idiomas disponibles
3. Memory card installation
Note: If the product has a seal on one of the screws you can remove it to insert
the memory card without losing the warranty of the product.
4 . M o u n t i n g t h e d e v i c e
ATTENTION: We recommend setting and testing the product before drilling
any holes in the wall.
Indoor bell:
●
measure the distance between the back holes of the bell then insert 2 nails
in the wall according to that distance
●
hang the bell on the wall on the 2 nails
Outdoor unit:
●
remove plastic cover of the unit by removing the bottom screw
●
place the plastic cover on the wall and mark the holes with a pencil
●
drill holes in the wall on the marks then insert pegs in them
●
place the plastic cover on the wall with the screws included
●
place the outdoor unit in the plastic cover and fasten it with the bottom
screw
Note: If you wish to use the device in a more complex access control system
that includes a lock and/or push button we recommend calling an authorized
person with knowledge in the field.
The outdoor unit support local recording of
images on a micro SD memory card that you
can buy separately. We recommend using
class 4 or higher max 64GB memory card.
To insert in the memory card in the outdoor
unit you have to remove the 4 screws on the
back of the unit then insert the card in the
dedicated slot in the indicated direction on the
main board.
Memory card slot
16
EN
Publicidad
