9
PROBLEM SOLVING
Problem
Connection
indicator on parent
unit does not light
up.
Connection
indicator on parent
unit flashes.
Battery indicator on
baby unit flashes.
Low battery icon on
parent unit screen
flashes.
Parent unit beeps.
Cannot see video
on screen.
Possible cause
Parent unit is switched off.
Battery of parent unit is not
installed correctly.
Battery of parent unit is empty.
No battery is installed in parent
unit.
Mains adapters or mains cables
are defective or batteries are
drained.
Parent unit and baby unit are out
of range with each other.
Baby unit is switched off.
Alkaline batteries in baby unit are
running low.
Battery in parent unit is running
low.
Battery in parent unit is drained or
damaged.
Lost connection with baby unit.
Baby unit is switched off.
Battery in parent unit is running
low.
Temperature alert is triggered.
Screen is turned off.
Parent unit and baby unit are out
of range with each other.
Battery in parent unit is running
low.
Full Eco Mode is activated.
Mains adapters or mains cables
are defective or batteries are
drained.
Solution
Press the
unit (chapt. 1.3).
Install battery (chapt. 3.1.2).
Recharge parent unit by connecting it
to mains (chapt. 3.1.1).
Connect parent unit to mains or install
battery (chapt. 3.1.2).
Replace with original parts. Ask your
retailer (chapt. 8.3).
Reduce distance between units (chapt.
3.2.1).
Press the
(chapt. 1.4).
Replace alkaline batteries or connect
baby unit to mains (chapt. 3.2.1).
Recharge parent unit by connecting it
to mains (chapt. 3.1.4).
Replace with original parts. Ask your
retailer (chapt. 8.3).
Reduce distance between units (chapt.
3.2.1).
Press the
(chapt. 1.4).
Recharge parent unit by connecting it
to mains (chapt. 3.1.4).
Check temperature in baby's room.
Turn on screen by pressing the
button (chapt. 6.2.2).
Reduce distance between units (chapt.
3.2.1).
Recharge parent unit by connecting it
to mains (chapt. 3.1.4).
Check whether Full Eco Mode is
activated or not (chapt. 6).
Replace with original parts. Ask your
retailer (chapt. 8.3).
48
button to switch on parent
button to switch it on
button to switch it on