SKYLOTEC Jackpod Davit Instrucciones De Uso página 26

Mounting bases must be set up or installed and used on an anchorage meeting the strength requirements
as specified in Section 3.1. Bases other than the Skylotec Jackpod Davit Portable
Base shown in Figure 6 must be set up or installed following the Manufacturer's setup or installation
EN
instructions provided with each base.
4.2 Jackpod Davit Portable Base
If you are using a Jackpod Base Portable with the Jackpod Arm, assemble the base as shown in Figure 6.
INSTALL LEGS
ADJUST LEGS
Figure 6, Assembling & Adjusting Jackpod Base Portable
NOTE: Some bases are shipped from the factory with the base sleeve assembly removed to reduce shipping size as
shown in Figure 7.
Base Frame Sleeve Assembly
Backup Plate
Mounting Bolts (8)
Figure 7, Disassembled Base Frame / Sleeve
26