Accessories, To Be Ordered Separately - HBM C16M Serie Instrucciones De Montaje

10

Accessories, to be ordered separately

1)
The threaded rods have to be adapted to the corresponding installation conditions on the cus­
tomer side.
C16M...
Each for two weighing modules (see Dimensions):
1-ZAC16/MSL40T, for C16/MSL20 t...40 t, consists of:
1 piece threaded rod M20x1000
6 pieces hexagonal nut M20 DIN 934, galvanized
2 pieces washer DIN 9021, ∅21 mm, galvanized
1-ZAC16/MSLR40T, for C16/MSLR20 t...40 t, consists
of:
1 piece threaded rod M20x1000
6 pieces hexagonal nut M20 DIN 934, stainless steel
2 pieces washer DIN 9021, ∅21 mm, stainless steel
1-ZAC16/MSL60T, for C16/MSL60 t, consists of:
1 piece threaded rod M30x1000
6 pieces hexagonal nut M30 DIN 934, galvanized
2 pieces washer DIN 9021, ∅31 mm, galvanized
1-ZAC16/MSL100T, for C16/MSL100 t + 200 t,
consists of:
4 pieces threaded rod M30x1000
12 pieces hexagonal nut M30 DIN 934, galvanized
4 pieces washer DIN 9021, ∅31 mm, galvanized
A1268-3.0 HBM: public
Accessories
1
), galvanized
1)
, stainless steel
1)
, galvanized
1)
, galvanized
21