SICE S 1000 Manual De Instrucciones página 155

5. Press the arrows to select the required inflation
pressure.
The selected pressure value is displayed in red
6. Connect the inflation hose to the valve stem (Fig. 46b).
INFLATION PROCEDURE:
7. Press the button
The wheel is inflated automatically to the selected
pressure.
The pressure is not displayed until the entire
inflation cycle is complete, and three horizontal
red bars are shown instead of the value (Fig. 46c).
Once inflation is complete, the pressure is dis-
played again in green (Fig. 46d).
At this stage, inflation has ended.
8. Disconnect the Doyfe inflation fitting from the
wheel.
9. Fit the inner core of the valve (Fig. 46a).
SPECIAL INFLATION PROCEDURE:
Use this function to improve tyre bead seating.
7A. Press the overinflate button
User manual S 1000
to start the cycle.
RISK OF EXPLOSION
Never exceed the pressure recommended by the
tyre manufacturer. Never mount tyres on rims with
a different diameter
An exploding tyre can cause personal injury or
death.
.
DANGER
46b
46c
46d
UK
155