Installation On The Machine Table - Allmatic TITAN 2 Serie Manual De Instrucciones

ALLMATIC
Battery life:
Dimensions:
Fully encapsulated high-pressure
spindle:
Transmission frequency:
Transmission range:
7

Installation on the Machine Table

WARNING
Falling of the ALLMATIC TITAN 2 (CA).
Crushing of hands and feet.
Ø Use suitable lifting gear only.
Ø Wear personal protective equipment.
Wear safety gloves!
Wear safety shoes!
Ø Check clamping surfaces for cleanliness and unevenness before installation.
TITAN 2 (CA) Serie
up to 4 years (2-shift operation)
as for a conventional spindle
IP67
– Change in clamping force: 2 Hz (2 x per second)
– Clamping force constant: 0.2 Hz (every 12 seconds)
up to 20 m, depending on environment
Installation on the Machine Table | 7
EN
59 / 474