Cleaning - Allmatic TITAN 2 Serie Manual De Instrucciones

ALLMATIC
Unclamp workpieces
1. Turn counter-clockwise until the ball coupling locks into position.
ð Clamping force is reduced and the mobile jaw moves.
2. Continue turning until the workpiece is resting loosely.
ð The workpiece can be removed.
10

Cleaning

CAUTION
Flying swarf and cooling emulsion.
Injuries to eyes.
Ø Wear safety goggles when cleaning with compressed air.
Wear safety goggles!
Use brushes, swarf vacuum cleaners or swarf hooks to clean the ALLMATIC TITAN 2 (CA).
After long periods of use, we recommend dismantling the ALLMATIC TITAN 2 (CA), cleaning it
thoroughly and oiling it.
TITAN 2 (CA) Serie
Cleaning | 10
EN
81 / 474