Maintenance; Troubleshooting - Allmatic TITAN 2 Serie Manual De Instrucciones

ALLMATIC
11

Maintenance

Only OEM parts must be used as replacement parts. Only use non-OEM parts with the
permission of ALLMATIC-Jakob Spannsysteme GmbH.
Maintenance and repair may only be carried out by qualified personnel.
WARNING
Falling of the ALLMATIC TITAN 2 (CA).
Crushing of hands and feet.
Ø Use suitable lifting gear only.
Ø Wear personal protective equipment.
Wear safety gloves!
Wear safety shoes!
Wear safety goggles!
12

Troubleshooting

Fault
Spindle or spindle nut moves
with difficulty.
TITAN 2 (CA) Serie
Cause
Spindle thread or sliding
surfaces contaminated with
swarf or corroded.
Maintenance | 11
Remedy
Dismantle ALLMATIC TITAN 2
(CA) and oil.
EN
83 / 474