Introduction - Omnitronic Kill-Mixer FX-524 Manual Del Usuario

FX-524 Kill-Mixer
For your own safety, please read this user manual carefully
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual

INTRODUCTION

Thank you for having chosen a OMNITRONIC FX-524. If you follow the instructions given in this manual, we
can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC FX-524.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.
Features
Professional 3-channel kill-mixer
Channels 1-3 on the frontpanel switchable between phono, line or aux • Mic 1 microphone-input via
unbalanced XLR-socket on the frontpanel • Mic 2 and Mic 3 microphone-input via 1/4" mono-jack on the
rearpanel • Input-sensitivity-control (gain) for each channel • 3-fold, separate tone-control (bass, middle,
treble) for each channel with extremely wide range • Absolute Kill-function (signal attenuated by -60 dB) for
every tone-control via Kill-switch • High-quality and super-smooth ALPS-channel-faders • Super-smooth
ALPS-crossfader replaceable from above • Crossfader for mixing channel 1, 2 and 3 (Crossfader Assign-
button) • Crossfader Punch In and Punch Out-buttons • 2 beat-indicators at the crossfader for perfect mixing
• 3 LED-level-displays (master-out L/R and Cue Level) • Headphones-connection on the frontpanel •
Headphones-output adjustable via Cue Level-control • Additional Cue Split/Cue Mix-button • Cue Split-
function: the Cue-signal is on the one side of the headphones and the output-signal on the other side • Cue
Mix-function: the adjustable mix of Cue-signal and output-signal is on both sides of the headphones • Mixing
of the headphones-signal possible via cue mixing-fader • Output signal adjustable via master-control and
balance-control • Master-Out, Booth-Out and Rec-Out via 2 RCA-sockets each • Rec-Out independent from
Master-level for records with static level • Separately controllable monitor-output (DJ-booth) for connecting
active-speakers or an additional amplifier • High-grade kill-mixer with a convincing sound
The Kill-function makes it possible for you to cut the signal completely off by switching the Kill-switch.
OPERATING INSTRUCTIONS
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
before you initial start-up.
CAUTION!
14