Omnitronic Kill-Mixer FX-524 Manual Del Usuario página 19

(1) 12 V LAMP
BNC-socket for gooseneck-lamp. The maximum current is 120 mA.
(2) POWER SWITCH with LED
Press this button to start operation. The Power-LED is illuminated when the mixer is ready for use.
(3) MASTER LEVEL / CUE LEVEL DISPLAY
The upper display shows the level of the left and right master output.
The lower display shows the level of the channel currently being cued (CUE LED on).
(4) GAIN-CONTROL
Used to set the level of the input signal.
(5) TREBLE-CONTROL
Used to increase or lower the HIs of the input signal.
(6) MIDDLE-CONTROL
Used to increase or lower the MIDs of the input signal.
(7) BASS-CONTROL
Used to increase or lower the LOWs of the input signal.
(8) PHONO/LINE/MIC-SWITCH
Used to select the input to be sent to the individual channel.
(9) CROSSFADER ASSIGN-BUTTON
Via this button you can select whether channel 1 (button pressed) or channel 2 (button released) will be
assigned to the left Crossfader-side. The other channel remains active.
(10) CHANNEL-FADER
Used to adjust the input level of each channel.
(11) CUE-BUTTON
Use the CUE-button in order to select the channel(s) to be monitored.
(12) KILL-BUTTONS
In order to cut the respective signal completely off.
(13) BEAT-INDICATOR
The LED lights up at every bass-beat of the respective source. Ass soon as the LEDs flash synchro-
nously, the speed of the two sources is synchronized.
(14) PUNCH IN/PUNCH OUT BUTTONS
For activating (PUNCH IN-button) and deactivating (PUNCH OUT-button) the desired channel on the
crossfader.
(15) CROSSFADER
Mixes the signals of one channel with another. If the crossfader is in the center-position, both channels
can be heard.
(16) MIC 1-SOCKET
You can connect microphones with XLR-plug and control the signals via the Mic Level-control. You can
adjust the microphone volume using the CH-1 fader. Make sure that the PHONO/LINE/MIC-switch is set
to MIC.
(17) TALKOVER-BUTTON
Press this button if you want to use your microphone. When the button is pressed, all signals but the
microphone level are attenuated by 14 dB. In the OFF-position, all signals return to their original level.
(18) CUE SPLIT/CUE MIX BUTTON
Cue Split-function (button pressed and Cue Split-LED illuminated): the Cue-signal is on the one side of
the headphones and the output-signal on the other side.
Cue Mix-function (button released): the adjustable mix of Cue-signal and output-signal is on both sides
of the headphones.
(19) CUE LEVEL-CONTROL
With the CUE LEVEL-control, you can adjust the headphones volume without changing the output
signal.
(20) HEADPHONES SOCKET
With this socket, you can connect headphones with an impedance between 8 Ohms and 600 Ohms.
(21) CUE MIXING FADER
Connect your headphones to the HEADPHONES socket. With the CUE-buttons, you can select the
desired channel.
When you set the CUE MIXING-fader to PGM (CUE-buttons without function), you can cue the output
signal of the mixer.
When you set the CUE MIXING-fader to to the center position, you can cue both the channel-signal you
selected and the output-signal.
(22) BOOTH-CONTROL
The FX-524 features a DJ BOOTH monitor system. Connect your monitor system with the BOOTH-
sockets on the rearpanel.
19