Altrad Belle TUBMIX 50 Manual Del Operador página 5

Screw the agitator tightly into the motor shaft.
The full locking of this part will take place when the
machine is in motion.
3
Insert the tub into the lower frame, making sure to
insert one of the four transport handles in the metal
tang provided.
This will prevent the rotation of the basket during
mixing.
4
Insert the agitator by positioning it as shown in
Fig. 5.
Lower the motor head in working position.
5
CAUTION!
MAKE SURE THE LOCKING DEVICE IS IN
LOCKED POSITION WHEN THE MACHINE IS
CLOSED (Fig. 6).
At this point, the TUBMIX is ready for use.
6
4. Basket Removing
Switch off the TUBMIX when the mixture is
completed. The agitator must be positioned inside
the basket as showed in Fig. 5
The TUBMIX has been designed to permit the
opening of the motor head only when the agitator is
in this position.
Keep with one hand release the locking device and
with the other one lift the motor head as showed in
Fig. 7.
7
CAUTION!
The plastic protection shield must never be
removed. This is a safety device prescribed by
law to prevent accidents.
5
GB