Operation - Lacor 69380 Instrucciones De Uso

OPERATION

Before starting to use the article, make sure you correctly install the lid as shown in figure 1.
Insert the lid and turn it clockwise (see figure 1) until the end of the lid and the handle fully
coincide.
The jug has a safety switch that should be pressed by the lid to allow its operation when the lid
and the handle are fully aligned. If incorrectly installed, the mixer will not start.
Indicator symbols
1- place the jug on the base of the device and connect the power cable to an electricity outlet of
220-240 V/50Hz.
2- The indicator light of the ON/OFF button blinks. Press the ON/OFF button once and the mixer
passes to "stand-by ready to be used
3- To select a function, press any button and immediately ON/OFF. The mixer will start to work
according to the pre-set parameters.
NOTE: The indicating light of the ON/OFF button will be green when the device is working and
red when it is off.
4- To cancel any function, press the ON/OFF button and the red indicating light will come on.
PRE-SET FUNCTIONS
IN COLD
ICE
This is for crushing ice. Press the "ICE" button and "ON/OFF" immediately to select this function.
The mixer will work at a determined speed during 50 seconds.
STIR
Press the "STIR" button to mix the food during its heating or cooking process. The blades will turn
all the time you press the button and maintain it.
BLEND
Press the "BLEND" button and immediately the "ON/OFF" to mix/grind the food at different
speeds. Press the "+" and "-" buttons to increase or reduce the rotation speed of the blades
during this function.
25