Genius ROLLER Manual Del Usuario página 8

1. DESCRIPTION AND TECHNICAL CHARACTERISTICS
2. DIMENSIONS
3. MAXIMUM USE CURVE
4. ELECTRIC EQUIPMENT (standard system)
5. INSTALLATION OF THE AUTOMATION SYSTEM
5.1. PRELIMINARY CHECKS
5.2. INSTALLATION OF LEAF SUPPORTING FOUNDATION BOX
5.3. SETTING UP THE GATE
5.4. INSTALLING THE OPERATOR
6. START-UP
7. TEST OF THE AUTOMATED SYSTEM
8. MANUAL OPERATION
9. RETURNING TO NORMAL OPERATION
10. SPECIAL APPLICATIONS
11. MAINTENANCE
12. REPAIRS
CE DECLARATION OF CONFORMITY FOR MACHINES
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Operator mod. ROLLER / ROLLER LENTO / ROLLER 24 with 230 Vac power supply
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive 98/37/EC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will become a com-
ponent has been identified and declared as conforming to the conditions of Directive 89/392/EEC and subsequent modifications assimilated in Italian
National legislation under Presidential decree No.459 of 24 July 1996.
Grassobbio, 06 June 2008
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
INDEX
(DIRECTIVE 98/37/EC)
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
draws your attention to the notes on the characteristics and operation of the product.
Managing Director
D. Gianantoni
6
page.7
page.7
page.7
page.7
page.8
page.8
page.8
page.9
page.9
page.10
page.10
page.10
page.10
page.10
page.10
page.10