Control Center; Control Center Menu P - Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario

Control center

It is the brain of the system. It automatically calculates and controls the operating time of each connected device. It receives orders from the
remote control or via the Internet and activates specific devices. The activity is retained in memory for 64 days (available for the user).
1: Screen (4 x 20 characters)
3: Doors fuse (10A)
5: Connectors cover (removable with a screwdriver)
7: Elastomer cover (insulation acid fumes and moisture)
9 : Deported magnetic radio antenna (option) ref : INTP-5240
11 : Multi cable grommet compatible for cable from diameter 7mm to 10mm, have to be fitted with silicon grease provided. Avoids any acid
vapour or humidity entering the system
12 : Cap, closes a hole in case of non utilisation of an output, to be fitted with silicon grease provided. Avoids any acid vapour or humidity
entering.
In the rubber grommet,
cables have to be fitted
with silicon grease
provided.
11
12
Remove the orange protection on Control center
To meet electrical codes, a snapfit security cover, unclipsable without tools, protects the electrical connectors.
> Place a flat screwdriver on the clips 2 and 3 while maintaining force on the cover to unclip.
8
1
2
CONTROL CENTER
3
4
5
6
7
1
2
2 : Buttons (menu navigation)
4 : Doors fuse (1A)
6 : Screw cover (protection against water ingress)
8 : Radio antenna
10 : Identification plate
12/07/1 3 15:23:48
Water t emp:+24.0° C
pH:7,3 ORP:629mV
Cond:55 71uS 3.51g/l
ESC
ENTER
4
3
8
10
model :
433.445 MHz
serial :
MADE IN FRANCE
Replace this electri-
cal protection after
each intervention.
9