Motorcycle Computer Instructions; Mode Button - SHERCO SE 250i Manual De Propietario

SE 250i / 300i
Control devices and controls (continued)

MOTOrCyCle COMPUTer insTrUCTiOns

n Display and lEDs
1 2 7 3 9
n Functions of the meter (multi function display)
Tachymètre
ToTAL
TD
AVE
LAP
mAX
CTDWN
HPERC
RPm
n Mode button
Using the mode button, you can:
-Switch between the different functions (does not depend on the speed of the vehicle)
-Reset the function, average speed, average time and the maximum speed (does not depend
on the speed of the vehicle).
-Set the time or set the unit of measure (vehicle speed = 0)
The mode button is active when the vehicle is turned on (key on).
To switch between different functions, just press the button 1 time.
76
8 4 5 6
Displays the instantaneous current velocity. (Km/h)
Odometer, displays total distance traveled. (Km)
TRIP, automatic function, shows daily mileage. (Km)
Displays average speed. (Km / h)
Function as an automatic chronometer.
Shows max speed achieved. (Km / h)
Functions as an automatic TRIP, countdown odometer. (Km)
Viewing hours of operation. (h)
Shows engine speed. (Rpm)
Turn signal LED (green)
1
High beam LED (blue)
2
Multi-function display
3
Current speed display
4
Hours
5
Mode selection button
6
Orange reserve fuel indicator light
7
will display symbol
screen. The light comes on when
the fuel has reached the reserve
level
Battery indicator lights.
9
on the
8