Removing The Fuel Tank - SHERCO SE 250i Manual De Propietario

SE 250i / 300i
Chassis maintenance (continued)

reMOving THe FUel TanK

98
Remove the seat (
Unscrew the fuel tank fixing screws
2
Remove the hose that attaches to the fork
crown
Disconnect the fuel pump electrical
connector
Remove the fuel hose by pressing the connector
1
and pulling on the hose
4
Attention, there is a risk of spraying fuel. do not put
3
your face near the fuel line exit.
Prevent ingress of dirt in the gasoline fuel line.
This can lead to a seizure of the injector.
Unscrew the screws
radiator grill.
Remove the fuel tank by pulling upwards, provide
lateral clearance by slightly moving the radiator
grills. Use caution when removing the fuel tank
and do not damage any of the fuel hoses or
5
electrical connections.
4
6
p.96)
☛
2
.
3
aTTenTiOn
don the right and left
6
.
1
.
5