Description Of Machine; Description Of Working Cycle; Description Of Commands; Technical Data - Bezzera STREGA Manual De Instrucciones

BEZZERA STREGA
MOD.

3 - DESCRIPTION OF MACHINE

3.1 Description of working cycle

S/R Versions
The water from the water mains (VERSION R) or from the tank on the rear of the machine (VERSION S), by
means of a pump, enables boiler loading and, through a relief valve set to 12 bars (1.2 MPa), exchanger
loading. The water in the boiler, heated by a resistance, warms the water in the exchanger. Lowering the
group lever, the water is directly pumped from the exchanger to the group chamber; when the group lever
is released, coffee is brewed.

3.2 Description of commands

1 Main switch
2 Brewing coffee lever
3 Hot Water Nozzle
4 Water Inlet Pipe (R version)
5 Power Supply Cable
6 Brewing Group
7 Filter Holder
8 Steam Nozzle
9 Steam tap
10 Hot water tap
11 Green Light
12 Safety light
13 Drain pipe (R version)
14 Boiler's gauge
15 2 cup filter
16 1 cup filter

3.3 Technical data

Power Supply
Resistance
Nominal power
Resistance
Boiler
Tank (S)
Width "A"
Depth "B"
Height "C"
Net Weight
Gross Weight (box)
Nipple for water supply (R)
Drain Connector Diameter (R)
(Fig. 01 - Fig. 09)
(Fig. 02)
V~/Hz
V~
W
W
lt
lt
mm
mm
mm
kg
kg
mm
220 – 240V~ / 50-60Hz
220 - 240
1350 - 1550
1250 - 1450
28 (vibration pump) S = 31 (vibration pump) R
30.5 (vibration pump) S = 33.5 (vibration pump) R
26
110 – 120V~ / 50-60Hz
110
1450
1350
2,0
4,0
330
450
710
G 3/8"
10