Defrosting The Cooler; Cleaning And Maintenance; Cleaning The Gas Burner - Dometic ACX3 30 Instrucciones De Uso

ACX3
6.10

Defrosting the cooler

A
NOTICE!
Never use mechanical tools to remove ice or to loosen objects stuck to
the device.
I
NOTE
Over time, frost builds up on the cooling fins inside the cooler. If this
layer of frost is about 3 mm thick, you should defrost the cooler.
➤ Disconnect the voltage and gas supply.
➤ Empty the cooler.
➤ Put a cloth in the cooler to absorb any excess water.
➤ Leave the lid open.
➤ Wipe the coolerdry with a cloth.
7

Cleaning and maintenance

A
NOTICE! Damage hazard
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
7.1

Cleaning the gas burner

!
WARNING!
• Work on gas installations may only be performed by qualified
technicians.
• Allow the burner to cool down before cleaning it.
I
NOTE
• Dirt in the gas burner is indicated by poor ignition or deflagrations.
• The manufacturer also recommends cleaning the burner after it has
not been used for an extended period, and at least once a year.
EN
Cleaning and maintenance
25