1. Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely
hope that you are happy with the contents of your kit. However, we would ask you to check all the parts before you
start construction, as we cannot exchange components which you have already worked on. If you find any part
is not acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model
Department. Please be sure to include a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit
contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification.
Please understand that we cannot entertain claims against us if the kit contents do not agree in every respect with
the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and
operating them safely requires a certain level of technical competence and manual skill, together with
discipline and a responsible attitude at the flying field. Errors and carelessness in building and flying
the model can result in serious personal injury and damage to property. Since we, as manufacturers,
have no control over the construction, maintenance and operation of our products, we are obliged to
take this opportunity to point out these hazards, and to emphasise your personal responsibility.
Additional items required:
RC system components:
MULTIPLEX Micro 5/7 receiver
MULTIPLEX MS-X2 servo (2 required)
PiCO-Control 400
Pushrod connector
Alternatively:
PiCO "Ein-Stein" (module containing
2 servos, receiver, switch)
PiCO Control 400
Pushrod connector
Flight battery:
MULTIPLEX 7/500 AR flight battery
Battery charger:
PiCO AUTO-charger for rapid-charging transmitter and flight packs
Adhesive:
MULTIPLEX 100 g (5-minute epoxy)
Tools:
Scissors, combination pliers, balsa knife, razor saw or hacksaw blade, screwdriver.
Specification:
Wingspan
Fuselage length
All-up weight
RC glider
Wing loading
Wing loading
RC functions
8
Building instructions
RC electro
approx.
approx.
approx.
approx.
Aileron, elevator and motor
Function
Elevator / aileron
Speed control
Elevator / aileron
Speed control
895 mm
515 mm
530 g
330 g
19.5 dm²
27 / 17 g/dm²
Order No. 21 4085
Order No. 5 5933
Order No. 6 5040
Order No. 7 2250
Order No. 70 3454
Order No. 1 4004
Order No. 7 2250
Order No. 70 3455
Order No. 15 5648
Order No. 9 2526
Order No. 60 3848