17027031_1010 PWE 11-100 NAFTA.book Seite 11 Mittwoch, 13. Oktober 2010 11:55 11
9 Cleaning, Maintenance
Motor cleaning: blow compressed air through the
rear ventilation slots of the machine regularly,
frequently and thoroughly. Here, the machine must
be held firmly.
10 Accessories
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Diamond cling-fit polishing discs
B Support plate with velcro-type fastening
For a complete range of accessories, see
www.metabo.com or the main catalogue.
11 Repairs
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
The plug and cord (incl. GFCI) must only be
replaced by Metabo or Metabo's customer service
team.
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault when
sending the tool for repairs.
12 Environmental Protection
Metabo's packaging can be 100% recycled. Scrap
power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
13 Technical Specifications
Explanation of details on page 2 . Subject to
changes serving technical progress.
D
= Maximum support plate diameter
max
M
= Maximum torque
t, max
M
= Spindle thread
l
= Length of the grinding spindle
n*
= No-load speed (maximum speed)
ENGLISH
n
*
= Speed at rated load
N
P
= Nominal power input
1
P
= Power output
2
m
= Weight without mains cable
Wear ear protectors!
* High-energy, high-frequency interference can
cause speed fluctuations of up to 20%, which
subside when the interference disappears.
Machine in protection class I
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENG
11