Main Menu; Configuring Inputs; Input Setup - Rotel RAP-1580MKII Manual De Instrucciones

22
ENTER button: Press ENTER to confirm a setting.
BACK Button: Press BACK to go back to the previous menu.

Main Menu

AUDIO CONFIGURATION
SPEAKER CONFIGURATION
SPEAKER DISTANCE SETUP
SUBWOOFER SETUP
SPEAKER LEVEL SETUP
The MAIN MENU provides access to OSD screens for various configuration
options. MAIN MENU is reached by pressing the SETUP
7
remote, or the MENU button
menu, move the highlight using the Up/Down arrow buttons on the remote
control or front panel and press the ENTER button on the remote control or
front panel. Press the SETUP/MENU button again or select "EXIT" on the
OSD to end setup and return to normal operation.
Configuring Inputs
A key step in setting up the unit, is to configure each source input using the
INPUT SETUP screens. Configuring the inputs allows you to set defaults for a
number of settings including the type of input connector, the desired surround
mode, custom labels that appear in the displays when a source is selected,
and many more. The following OSD menus are used to configure the inputs.

Input Setup

VIDEO INPUT : HDMI 1
AUDIO INPUT : USB Audio 2.0
TRIGGER OUTPUT : 1 _ _
DEFAULT MODE : Source Dependent
AUDIO DELAY : 0m sec
LEVEL ADJUST : 0dB
FIXED VOLUME : Variable
The INPUT SETUP menu configures the source inputs and is accessed from
the MAIN menu. The screen provides the following options, selected by
placing the highlight on the desired line using the Up/Down arrow buttons:
SOURCE: Changing this input allows you to select a specific input for
configuring (CD, TUNER, VIDEO 1–8, USB, PC-USB, XLR, PHONO & MULTI
INPUT, BLUETOOTH).
NAME: The name of the source can be customized. For example VIDEO1
can be named "TV" for easier reference. The default NAME is the same
as the SOURCE. Place the highlight on this option and press ENTER on the
remote control or front panel, it will then take you to the SOURCE NAME
EDIT sub menu.
1. Press the Left/Right arrow buttons on the remote control or front panel to
change the first letter, scrolling through the list of available characters.
MAIN MENU
INPUT SETUP
VIDEO SETUP
SYSTEM SETUP
EXIT
H
on the front panel. To go to the desired
INPUT SETUP
SOURCE : PC-USB
NAME : PC-USB
Dirac : Disable
BACK
2. Press the ENTER button on the remote control or front panel to confirm
that letter and move to the next position.
3. Repeat steps 1 and 2 until all eight characters have been completed.
The final press of the ENTER button saves the new name. Or select
8
the "
characters to enter.
VIDEO INPUT: Selects the video source to be displayed on the TV monitor.
Assign the input to a source component you have connected by selecting
from HDMI 1–7 and HDMI Front. For audio only sources (such as a CD
player), you would typically specify OFF so that no video is displayed. The
video source can also be set to "Last Video Source" so when switching to
the specified Video input the previous Video source is not changed. This
feature is useful if you want to change only the audio and keep watching
whatever was the last displayed video source.
button on the
AUDIO INPUT: Assigns a physical input connection for the source displayed
in the first line of the menu. Options include Optical 1–3, Coax 1–3, HDMI
Audio, Tuner, Multi Input, XLR, Phono, CD, Bluetooth, PC-USB, USB, ARC,
AUX or Off.
NOTE: Optical, Coaxial,CD and XLR inputs can be assigned to the
CD input source or Video 1-8. Audio input is not available to the XLR,
PHONO, TUNER, MULTI INPUT, BLUETOOTH or USB input source.
When selecting the input source for "PC-USB", AUDIO INPUT can be
changed to "USB Audio 1.0" or "USB Audio 2.0". USB Audio Class 2.0
may require installation of the PC driver. For more information please see
PC-USB section in this manual.
TRIGGER OUTPUT: The RAP-1580MKII has three 12V trigger outputs (labeled
1 – 3) that supply a 12V DC signal to turn on other components as needed.
This menu item turns on specific 12V trigger outputs whenever the indicated
input source is selected. For example, configure the VIDEO 1 input to turn
on the 12V trigger for your DVD player. Any combination of trigger outputs
can be programmed for each source.
1. Place the highlight on the option "TRIGGER OUTPUT" and press the
ENTER button on the remote control or front panel.
2. Press the Up/Down arrow buttons on the remote control or front panel
to change the first position from blank to 1 (activating TRIGGER 1 for
that source) and use the Left/Right arrow buttons to move to the next
position.
3. Repeat until all three positions are set as desired. The final press of
the ENTER button confirms the selection.
NOTE: The 12V trigger output 1 is defaulted to be turned on for all
input sources. You can turn it off by following the steps as above.
DEFAULT MODE: The DEFAULT MODE setting allows you to set a default
audio mode for each source input. The default setting will be used unless the
source material triggers automatic decoding of a particular type or unless
the default setting is temporarily overridden by the front panel or remote
surround mode buttons.
Options for the default surround modes are: Stereo, Dolby 3 Stereo, 5
channel Stereo, 7 channel Stereo, 9 channel Stereo, 11 channel Stereo,
RAP-1580MKII Surround Amplified Processor
" button on the screen to confirm if you have less than eight