15. System settings
15.1. Equaliser
Under EQUALIZER, you can select a default sound format or configure your own.
Select one of the following sound formats:
NORMAL, FLAT, JAZZ, ROCK, MOVIE, CLASSIC, POP, NEWS or
MY EQ and press OK to confirm. The setting will take effect immediately.
The sound format is preset to NORMAL. The best sound format for
playing music is the setting ROCK.
MY EQ
If you have selected a personalised sound format under the following entry, se-
lect MY EQ to take over the sound format directly.
MY EQ SETTINGS
Set your personalised sound format for MY EQ here.
Set the bass, treble and volume by turning the VOLUME OK controller on the
device or by pressing the corresponding navigation buttons on the remote con-
and press the OK button to store the entry.
trol
Press YES to confirm the subsequent prompt and to store the sound format.
15.2. Internet settings
Configure the internet settings under INTERNET SETTINGS.
15.2.1. Network wizard
Select NETWORK WIZARD to start searching for networks.
Then enter the WEP/WPA key to connect the device with the wireless AP.
15.2.2. Establishing a WPS connection
You can establish a WPS connection under PBC WLAN SETUP:
Activate the WPS connection on the device, which supports WPS and then con-
firm the connection on the internet radio. To do this, select YES and press OK
to confirm.
15.2.3. Displaying settings
Information about the currently connected network and the device's MAC address is
displayed under VIEW SETTINGS.
15.2.4. Manual settings
Under MANUAL SETTINGS, select wireless connection (WLAN) and set the
DHCP function to DHCP ENABLE or DHCP DISABLE.
276