Conference - Midland BTX1 PRO S Manual De Instrucciones

Pair the Midland BTX1 PRO S to another Midland BTX1 PRO S unit
To pair the Midland BTX1 PRO S to another Midland device unit, you must
first enter the setup mode:
1. Turn off the unit.
2. Press and hold down the middle button about 7 sec., until the Red light is
on permanently.
3. Now press the Middle or the Backward or the Forward button for 3 se-
conds. The Blue and Red lights will flash.
4. Do the same procedure on the other unit, when successfully paired, each
unit will have the Blue light on for one second and then go back to the setup
mode (Red light always on).
5. Now the pairing procedure is complete, you can go on pairing other units on
different button or just exit the setup mode to start using the units:
6. Double click on the Middle button, the Red light will turn off and the
Blue light will start flashing.
You can use now your BTX1 PRO S.
How to use the Intercom with more than two units
To use the intercom feature, be sure that all the units are turned on and cor-
rectly paired together.
Manual activation in Intercom mode
Press the button corresponding to the unit you would like to communicate
with. After some seconds the intercom communication will open.
The communication remains active until you press again the same button. To
quickly open the intercom to another person, just press the button correspon-
ding to the other unit, the intercom will be automatically closed and the new
connection will be opened.
Voice activation (VOX)
The voice activation feature can open the intercom only to the unit paired to
the Middle button.
Hint: this feature is very useful when you have a specific person that you like to talk
to more often (for example your passenger). In this way you don't need to press a
button to open the communication.
www.midlandeurope.com
Unit already busy in a conversation
If you try to open an intercom connection to another person that is already
talking with some one else (or is in a middle of a phone conversation), you will
hear a "busy" double beep tone. Just wait sometime and try again, maybe this
time the "line" is not busy.
The person who is called, will be advised that someone is trying to call and will
hear a voice announcement with the number of the button from which the
request is coming.
1
In this way as soon as the first conversation is over, the person can easily con-
tact the caller by opening the intercom of the specific button number (indica-
ted by the voice announcement).

Conference

The "Conference" mode allows the communication with three people simulta-
neously. The Midland BTX1 PRO S unit can work as usually, with "one to one"
communication up to 3 people ("classic" Intercom mode) or with 3 people
conference intercom (Conference mode).
How to use the conference mode
First of all you need to pair all the units in a "chain" mode, second the "Confe-
rence" feature must be active on the central unit.
3
2
23