Installation - ccei WOM20 Manual De Instalación

Technical Manual

4. Installation

The WOM20 are mounted in the return inlet of the pool.
Installation of the light :
• Route the cable through the specific support at the back of the light
• Unscrew the eyeball or nozzle initially mouted
• Mount the light with the cable going above the pool wall (the transformer MUST remain out of
the pool) and screw the eyeball provided with the light.
• Connect the plug on the transformer and tighten it
• Power the transformer with a 230V socket protected by a 30mA residual circuit breaker.
If required you may use the rubber rings to avoid any backlash while tighten-
ing (depending of the brand of the return inlet)
WOM20
www.ccei.fr
v1.1MULTI
3