Energy Saving Tips; Switching On The Refrigerator - Dometic CRX1065D Instrucciones De Montaje

Ocultar thumbs Ver también para CRX1065D:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 76
CRX
I
NOTE
• Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 25).
• When using the refrigerator for the first time, there may be a mild
odour which will disappear after a few hours. Air the living space
well.
• Park the vehicle so that it is level, especially when starting up and
filling the refrigerator before setting off on a journey.
• Do not use force to press the flap of the freezer.
• Do not pull out the dividing wall if there is ice in the freezer.
• Do not remove the panel sticker when operating the refrigerator.
8.1

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• Allow hot food to cool down first before you put it in the refrigerator.
• Do not open the refrigerator more often than necessary.
• Do not leave the refrigerator drawer open for longer than necessary. If the drawer
is left open for more than 5 minutes, the light starts to flash.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at regular intervals.
8.2

Switching on the refrigerator

I
NOTE
Start the refrigerator only if you are using a battery monitor or if the
alternator in your vehicle provides sufficient voltage.
➤ Switch the refrigerator on by pressing the
I
NOTE
8
After switching on, the refrigerator needs some time before the
compressor starts up.
EN
Using the refrigerator
button.
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Crx0065d

Tabla de contenido