Dirna SUN ELECTRONIC Instrucciones De Montaje página 14

SUN
EN
For the unit to operate, it must be suitably located in order to make use of the flow of heat,
1
carrying out the correct connection and installation of the power cables.
2
The SUN units are supplied with a set of
brackets, suitable to secure the heating
unit in the most optimum position in each
case.
The set of brackets comprises 1 type A
and 2 type B pieces.
To secure the unit on vertical panels,
3
mount the main bracket (A) using the
outer borehole option (T1), as shown in
the figure. (Both sides, with M6 screws
supplied.)
The bracket can be mounted upwards or
downwards according to needs.
Then mount the side safety devices in the
4
indicated position in order to guarantee
anti-turn. Anchor in the front of the SUN
and in the bracket boreholes with the M6
screws supplied.
2
B
3
4
14
dirna
A
B
T1
, s.a.
A