Dirna SUN ELECTRONIC Instrucciones De Montaje página 15

SUN
To secure the SUN unit on a horizontal
5
panel, mount the bracket (A) as shown.
In the borehole option (T2) (on both sides
with the M6 screws supplied), position the
straight part of the bracket forwards, to
prevent it interceding on the curves of the
frames.
The bracket may be mounted upwards or
downwards, depending on whether ceiling
or floor is required.
Then mount the side safety devices,
6
paying attention to the indicated position,
in order to secure them and ensure anti-
turn. Use M6 screws, as supplied, on both
sides.
Anchor in the front of the SUN and in the
bracket boreholes (both sides).
Figure 7 shows the rear position. The rear
7
bracket will be secured to the frame with
1 screw (M6), and the anti-turn brackets
attached to the frame with 1 screw (M6)
and to the bracket with 2 screws, on both
sides.
The brackets have several positions;
choose the most appropriate for each
occasion.
5
6
7
15
dirna
, s.a.
EN
T2
A
T1
A