Mode Button; Headphone Socket - Gima Sonoline C Manual Del Usuario

ENGLISH
28

3.2.2 Mode Button

Function: Mode selection, press once M enter next working mode under working
status. For the Fetal Doppler has memory function, when tuming on the
machine, it will enter the mode selected before last power off automatically after
self testing.
3.2.3 Start/Stop Button
Function: Start/Stop control.
Under mode! 3, press this button the fetal heart rate counting starts, press this
button again the counting stops.
3.2.4 Volume Control Indicator
Volume adjusting direction indicator.
From left M right means that the sound leve! is from high to low.

3.3 Headphone Socket

Headphone Socket: a socket for audio output, and can be connected
with earphone or recorder with audio input M record.
The socket, terminal post, or switch that connected with the
headphones. Accessory equipment connected to the analog and digital
interfaces must be certified according M the respective IEC standards (e.g. IEC
950 for data processing equipment and IEC 60601-1 for medical equipment).
Furthermore all configurations shall comply with the valid version of the system
standard LEC60601-1-1. Everybody who connects additional equipment M the
signal input connector or signal output connector configures a medicai system,
and is therefore responsible that the system complies with the requirements
of the valid version of the system standard IEC60601-1-1. If in doubt, consult
our technical service department or your locai distributor.