AKG C 420 Modo De Empleo página 17

Fig. 6
3. If the behind-the-neck headband does not fit
snugly, readjust the temple pieces as shown in
fig. 6. Slide the cable holder so as to slacken
the cable a little (refer to fig. 7).
4. Should the micro-
phone still fit loo-
sely, bend
b e h i n d - t h e - n e c k
headband
inward referring to
fig. 8.
5. Bend the gooseneck so that the microphone
will sit to one side in front of the corner of your
mouth.
6. Reeve the microphone cable through the three
slots in the cable clip and clamp the cable clip
on your shirt collar. This takes the pull of the
cable off the microphone and the microphone
will fit your head securely and lightly.
Fig. 7
the
slightly
Fig. 8:
3 Operating Notes
www.audiovias.com
Readjusting the
Temple Pieces:
Aligning the
Microphone:
Strain Relief:
17