Safety Instructions; Special Instructions - Berner 369541 Instrucciones De Manejo

You must observe the following points in the interest of
your own safety!!!

Safety instructions:

• The B014 causes considerable noise pressure.
Please wear hearing protection in order to avoid noise which can be damaging to your health.
When working with the B014, small parts may be whirled into the air: Wear protective
•
goggles to prevent eye injuries.
Only use the B014 in ventilated spaces.
•
• Never operate the B014 with more than 8.5bar.
• Never point the B014 towards the face or body.
Keep the B014 out of the reach of children.
•
We recommend you never clean any safety-related components, e.g. safety belts, electrical
or electronic modules, with the B014.

Special instructions:

The written and spoken information and recommendations which we provide to support the
purchase/user, are the result of previous experience and the latest findings. Because of the
manifold possibilities for use and processing conditions, this information is without obligation and do
not constitute a contractual legal relationship or any supplementary obligations of the sales contract.
In any event, the purchaser holds responsibility for checking suitability for the intended use himself.
Always read the safety warnings for cleaning liquids and contact the manufacturer in case of doubt.
Our liability and repsonsibility is based exclusively on our general terms and conditions of business
and are not expanded on by either this information or the technical advice of our technical field staff.
Operating instructions:
1. Remove loose soiling from the surface you wish to clean (brush or vacuum clean)
2. Important: Hold the cleaning spout at a distance of only 1-3 cm from the surface you are
cleaning.
3. Press the "trigger" all the way; move the B014 slowly with circular motions over the
surface you are cleaning.
REQUIRED AIR RATE
To perform to its full potential, the B014 requires a constant air pressure of 6-8 bar.
CAUTION:
Constant air rates vary depending on the size and power of the compressor.
Always make sure that the tank and the air hoses are free of impurities of any kind.
EN