Berner 369541 Instrucciones De Manejo página 8

Read and understand these instructions before operating the tool.
General safety instructions and individual safeness
Attention
You need to read, understand and follow the complete instruction manual and the safety

briefing BEFORE USE. Afterwards the instruction needs to be kept at a adequate place,
accessible for any user.
The unit may only be used, cleaned and maintained by persons who understand and follow

this instruction. The operator must be in physically condition to utilize the tool.
Improper use or unauthorized modification will cause serious health damage by yourself,

somebody else or animals and other property.
 Individual safety instructions from the related countries needs to be observed additional.
Make sure that the tool is out of range for children or other persons who are not familiar with

the handling of the unit. Switching on the device by such persons is dangerous.
Workplace hazards:
• Slipping, stumbling or collapsing are the main reasons for serious or deadly accidents. Take care
for hoses which maybe are in the near operating area.
• Maintain a balanced body position and secure footing.
• Cyclic courses of movements, inappropriate posture and constant vibrations will cause fatigue to
arms, hands and body.
• High sound levels can lead to permanent hearing loss. Use hearing protection as recommended.
• Avoid breathing in dust or handling debris from work process which can be harmful to your health.
• This tool may only be used and maintained by qualified people who are in the constitutional
position to handle the dimension, weight and force of the device.
• This tool is not intended for use in explosive atmospheres and is not insulated for contact with
electrical power sources.
• Please consider that the material your tool is made of always can have material tiredness.
Projectile hazards:
• Even small projectiles, for example swirled by the outlet air of your tool, can injure eyes and lead
to blindness.
• Always wear impact-resistant eye and face protection when involved with or near the operation,
repair or maintenance of the tool or changing accessories on the tool.
• Also take care that people surrounding you will follow the instruction to wear impact-resistant eye
goggles and face masks.
• In case of a male function switch off the device immediately and provide the tool to a authorized
service station to check.
• If you recognize high unusual vibration switch of the unit and look for the reasons. Do not switch
on again until before the problem is solved.
Individual safeness
• Only use the tool in well-rested conditions.
• Always take care what you are doing and use your commonsense.
• Do not use the tool when you are tired or under the influence of medicine, alcohol or drugs. Any
carelessness will cause serious hurts.
• Always wear adequate protective clothing and eye protection. Further protection like dust masks,
helmets, ear protection, work gloves or nonskid safety shoes may be required. Pls. refer to the
pictograms in this manual. Even if these clothing's are not especially required we highly
recommend to use them as the risk of injury will decrease formidable.
• Always disconnect the device from air supply when not in use, before changing accessories or
maintenance to avoid starting the tool by mistake.
• Always check the unit, hoses and fittings for damages or loose before use.
• Make sure that any spanners or other parts you have used with the tool will be removed before
operating.
EN