Connections To Program Transmission Systems - Sony VideoStore VSR-1000 Instrucciones De Funcionamiento

Connections to Program Transmission Systems

Installing BKSR-101/101P/102 Decoder Boards
permits playing back stored video clips and sending
out playback signals.
Connection of BKSR-102 Two-Channel Decoder Board outputs (when composite video
mode is selected)
The BKSR-102 is set to composite video mode at the
factory.
FAN 3 FAN 3
VSR-1000 Media Control Unit
Reference
1
video signal a)
1
1
1
Reference
a)
video signal
1
FAN 2 FAN 2 FAN 1 FAN 1
CHANNEL A SYNC IN
CHANNEL A COMPOSITE OUT 1
CHANNEL A COMPOSITE OUT 2
CHANNEL B SYNC IN
CHANNEL B COMPOSITE OUT 1
CHANNEL B COMPOSITE OUT 2
1
Program transmission/
monitoring system
2-channel audio system
Composite video system
Cables:
1 75-ohm coaxial cable with BNC connectors
(not supplied)
2 Audio cable with XLR 3-pin connectors
(not supplied)
CHANNEL A
CH1
CHANNEL A AUDIO OUT CH1
CH2
CHANNEL A AUDIO OUT CH2
AUDIO OUT
VIDEO
SYNC
IN
1
2
COMPOSITE OUT
CH1
CHANNEL B AUDIO OUT CH1
CH2
CHANNEL B AUDIO OUT CH2
AUDIO OUT
VIDEO
SYNC
IN
1
2
COMPOSITE OUT
BKSR-102 Two-Channel
CHANNEL B
BKSR-102 Decoder Board
a) With no reference signal being input to the SYNC IN
connector, the playback signal will be in
synchronization with the reference video signal input to
the REF VIDEO IN connector of the board in slot No. 9.
2
2
2
2
17