Work Area; Personal Protective Equipment - Hilti SF 2-A Manual De Instrucciones

well away from flammable materials, and allow it to cool down.
Contact Hilti Service after the battery has been allowed to cool.
5.3.4 Electrical safety
en
Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and water
pipes are present. External metal parts of the power tool may become live,
for example, when an electric cable is damaged accidentally. This presents
a serious risk of electric shock.

5.3.5 Work area

a) Ensure that the workplace is well lit.
b) Ensure that the workplace is well ventilated. Exposure to dust at a
poorly ventilated workplace may result in damage to the health.

5.3.6 Personal protective equipment

The user and any other persons in the vicinity must wear ANSI Z87.1-
approved eye protection, a hard hat, ear protection, protective gloves
and breathing protection while the machine is in use.
12
Printed: 24.03.2014 | Doc-Nr: PUB / 5174907 / 000 / 00