Hilti SF 2-A Manual De Instrucciones página 17

position). Use only the Hilti batteries approved for use with this power
tool.
CAUTION
Before inserting the battery in the tool, check to ensure that the battery
terminals and the contacts in the tool are free from foreign objects.
en
1. Push the battery into the power tool from the front, as far as it will go,
and until it is heard to engage with a click.
2. CAUTION A falling battery may present a risk of injury to yourself and
others.
Check that the battery is seated securely in the power tool.
6.4 Removing the battery
1. Press the release button.
2. Pull the battery out of the tool towards the front.
6.5 Transport and storage of battery packs
Remove the battery from the tool before transport or storage. Make sure that
the battery contacts are not short-circuited. Remove loose metal items such
as screws, nails, clamps, loose screwdriving bits, wires or metal cuttings
and chips from the toolbox or transport container, or prevent these items
from coming into contact with the battery.
Observe national and international transport regulations when shipping
battery packs (transportation by road, rail, sea or air).
6.6 Belt hook
CAUTION
Check that the belt hook is fitted securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by the
operator. The belt hook can also be fitted to the other side of the power tool
for use by left-handed persons.
1. Remove the battery from the tool.
2. Fit the mounting plate into the guides provided.
3. Secure the belt hook with the two screws.
14
Printed: 24.03.2014 | Doc-Nr: PUB / 5174907 / 000 / 00
2
3